IRobot SCOOBA 450 Bedienungshandbuch Seite 29

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 28
Scooba 400 Series Owner’s Manual 29
EN
My front wheel is missing.
Please check then press
CLEAN to restart.
Scooba’s front wheel has
fallen out.
Check if the front caster wheel is
missing. If so, replace it.
Please check that my clean
tank is full, then press CLEAN
to restart.
Scooba’s clean tank is empty. Check if the clean water tank is
empty. If so, add water and Scoo-
ba Hard Floor Cleaner to the tank.
Scooba’s clean tank empty sensor
is incorrectly detecting an empty
tank because of poor electrical
connections.
Check if there is debris on the met-
al connections between the tank
and the robot. If so, clean them.
Scooba’s clean tank empty sensor
is incorrectly detecting an empty tank
because distilled water is being
used.
Use tap water or add Scooba Hard
Floor Cleaner to the tank.
Scooba’s pump is not pumping
sufficient fluid from its clean tank.
Turn off and press CLEAN to
restart pump priming.
I’d love to start cleaning, but
my battery isn’t quite full.
Please charge me completely.
Scooba is not able to complete
a mission because its battery is
partially depleted.
Return Scooba to its charger for at
least two hours.
Scooba is not able to complete
a mission because its battery is
damaged or worn out.
Replace the battery.
Scooba is not able to detect all of
its battery connections.
Check if there is debris on the
battery or inside the battery com-
partment. If so, clean them.
I have experienced error
[number].
Scooba is experiencing an unusual
error.
Contact iRobot support:
global.irobot.com
ERROR MESSAGE WHAT’S CAUSING IT WHAT TO DO
I’m stuck. Please move me,
then press CLEAN to restart.
One of Scooba’s wheels is not flat
on the floor.
Check if Scooba is stuck on top of
an object, or if one of the wheels is
in a depression. Move Scooba so
all wheels are on a flat floor.
Scooba is too close to stairs or
other drop-offs and needs help to
escape.
Move Scooba to a new location on
a flat floor.
Scooba is operating in a very
large open room and has not
encountered any walls or furniture
for a long period of time.
Use Virtual Walls to section off a
smaller area.
Something might be stuck in
my brushes, Please check,
then press CLEAN to restart.
Scooba is not able to spin its roller
brush easily.
Check if there is debris stuck on
the roller brush, particularly under
the yellow end caps. If so, remove
the debris.
Scooba’s brush is not connected to
the brush motor because the brush
gear is not engaged properly.
Verify that the roller brush is properly
installed in the cleaning head. Verify
that Scooba’s cleaning head is
properly installed.
The brush is not connected to the
brush motor because the gearbox
is damaged.
Check if the brush spins with no
resistance at all. If so, call iRobot
support.
Something might be stuck in
my bumper. Please check,
then press clean to restart.
Something is preventing Scooba’s
bumper from moving freely.
Check if the bumper has debris
stuck between it and Scooba’s
body. If so, clean it.
Scooba’s bumper is damaged. Contact iRobot support.
Something might be stuck in
my wheels. Please check, then
press CLEAN to restart.
Scooba is not able to turn both of
its side wheels.
Check if there is debris stuck
between the wheel and the wheel
motor module. If so, remove the
debris.
It looks like something is block-
ing the sensors on the bottom
of my bumper. Please check
then press CLEAN to restart.
Scooba’s cliff detection sensors are
dirty and blocked.
Check if there is debris stuck to
the cliff sensors on the robot. If so,
clean them.
Scooba’s cliff detection sensors
are seeing black matte flooring as
a cliff.
Check if robot is stuck on a black
surface. If so, move the robot to a
new location.
Seitenansicht 28
1 2 ... 24 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare